RIDGID K-60SP Sectional Machine

RIDGID K-60SP Sectional Machine

RIDGID K-60SP Sectional Machine

The K-60SP is a compact drain cleaning machine that's portable enough to carry up a ladder, yet powerful enough to unclog tough blockages. Ideal for rooftop vent stacks and institutional, commercial or residential cleaning. Rear handle allows for easy transporting up ladders and onto rooftops. Simple adjustment knob allows unit to spin both 7/8" and 5/8" diameter cable. Adjusts in seconds.

Sectional Cables:

7/8" cable (C-10) cleans 2" to 4" lines through 150'.

5/8" cable (sold separately) cleans 1 ¼" to 4" lines through 125'.

Features:

A compact machine for institutional, commercial or residential cleaning.

Also ideal for septic tank vacuum truck operators.

Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages.

Ideal for rooftop vent stacks. Rear handle allows for easy transporting up ladders and onto rooftops.

Remove only two bolts to access jaw set for cleaning or replacement. Removal of same bolts provides access to belt drive.

Equipped with 1/2 HP motor. 600rpm. CSA approved. Approved to UL standards (NRTLC).

K-60 Manual

Full Lifetime Warranty

K-60SP from $1,887.56

Free Freight - 48 States

K-60SP-SE Package

RIDGID K-60SP Sectional Machine 120V/50-60 Hz

Part # Model Included Price

# 66492 K-60SP
Machine with A-1 Operator’s Mitt, A-12 Pin Key, and Rear Guide Hose
$1,887.56

# 66497 K-60SP-SE
Machine with A-1 Operator’s Mitt, A-12 Pin Key, and Rear Guide Hose, plus: A-61 Tool Kit* and A-62 Cable Kit**
$2,525.64

*A-61 Tool Kit Includes:

T-101 Straight Auger, T-102 Funnel Auger, T-107 Spade Cutter, T-125 Retrieving Auger, T-150-1 Sharktooth Cutter, A-3 Tool Box, A-12 Pin Key

**A-62 Cable Kit Includes:

Five Sections C-10, 7/8" x15' Cable, A-8 Cable Carrier

The RIDGID® K-60SP is a portable Drain Cleaning Machine designed to clean 1 ¼" to 4" drain lines. Applications include laundry tubs, floor drains, roof vents and stack lines. Rear handle allows for transporting up ladders and cleaning roof-top vent stacks. The machine is driven by a 1/2 HP motor that has a grounded electrical system. An integral Ground Fault In - terrupter (GFCI) is built into the line cord. A toggle switch provides FOR/OFF/REVERSE control of the motor. The K-60SP is designed to use sectional-type cable that has a quick change coupling system for disconnecting tools. The cable is manually fed in and out of the drain and rotates at a speed of 600 RPM. The rotation of the cable is controlled by a clutch handle. The cable stops instantly when the clutch handle is released. An adjustment knob allows the K-60SP to use both 5 /8" and 7 /8" sectional cable.

Return to RIDGID Sectional Drain Cleaners

Not sure which RIDGID drain cleaner is right for you? Call us and allow one of our knowledgeable sales staff to guide you.