General Mini Rooter Pro Drain Cleaner

General Mini Rooter Pro Drain Cleaner

This inexpensive, light weight machine has lots of time-saving features. For instance, you can remove the drum in seconds for more portability or to switch to a different diameter cable - with no mess and no lost time. A distributor tube inside the drum allows you to feed cable in and out without chucking and releasing the cable every few feet - so you finish quicker.

Mini Rooter Pro Drain Cleaner

• Clears 1-1/4" to 3" lines and most 4" lines.
• Holds 75 ft. of 3/8" or 50 ft. of 1/2" Flexicore®
• Built in 6" wheels for easy transport, and folding handle for compact storage.
• 1/3 hp motor with reverse switch and pneumatic foot pedal.
• Drum removes in seconds for more portability.
• Flexicore wire rope center cables have unequalled strength yet the right amount of flexibility.
• Made in U.S.A.

Starting at $852.00
Free Freight - 48 States

PART # What's Included w/Cutter Set Price

MRP Basic Unit: MR-200 Drum, 1/3 hp Motor w/Rev. Switch,
10 ft. Power Cord w/GFI, Water-Proof Air Foot Switch,
Handle & Wheels Assembly, Leather Gloves $852.00

MRP-J Basic Unit: Same as above, but with MR-250 J-Drum*
instead of the MR-200 Drum $1063.00

MRP-A Basic Unit + 50EM2 (50 ft. x 3/8"), MRCS Cutter Set $1005.00

MRP-B Basic Unit + 75EM2 (75 ft. x 3/8"), MRCS Cutter Set $1058.00

MRP-C Basic Unit + 50EM3 (50 ft. x 1/2"), MRCS Cutter Set $1051.00

*J-Drum:
For small drain work, you can order your Mini-Rooter Pro with a J-Drum for handling smaller, more flexible cables. J-Drum capacity of 50 ft. of 1/4" or 5/16" Flexicore cable.

Cutter Set:
MRCS Cutter Set consists of Arrow head, Boring Gimlet, 1-1/2 U-Cutter, 2" Side Cutter Blades. Other cutters available.

Motor:
1/3 hp, with forward-off-reverse switch, spring-loaded mounting for proper belt tension. 165 rpm at load speed.

Foot Pedal:
Leaves operator's hands free to control cable. Uses air pressure, so there's no electrical contact between pedal and motor.

Removable Drum
You can take the drum off the Mini-Rooter Pro in seconds. The drum carries up to 75 ft of 3/8" cable to clear 2" to 3" lines, or 1/2" cable for heavier work in 4" lines.

Features
The handle is tall enough to make it easy to roll to the job, yet it can be quickly folded to take up less room in your truck. Some Mini-Rooter Pro safety features: A foot pedal that uses air pressure to start and stop the machines, with no electrical wiring between the pedal and motor, a ground fault circuit interrupter, and a high impact plastic guard covering the motor pulley. Six inch semi-pneumatic wheels roll easily over rough terrain to and from the job.

Weight:
Weight: 43 lbs. (19.5 kg) (without cable)

Dimensions:
20" D x 16" W x 38" H (20" H with handle folded)

Drum:
Capacity of 75 ft. x 3/8" or 1/2" Flexicore cable. Integral distributor tube. Quickly removable from frame.

Flexicore® Cable:
Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It's so tough, it has a one year warranty against defect or breakage.

Optional Equipment:
For small drain work, you can order your Mini-Rooter Pro with a J-Drum for handling smaller, more flexible cables. J-Drum capacity of 50 ft. of 1/4" or 5/16" Flexicore cable.

Return to General Wire Drain Cleaning Machines