The TrapMaster is a push camera centering device that allows you to maneuver your push camera through corners and p-traps during a pipeline inspection.
Front section mounts at the camera head.
Rear section mounts at the optimal spot along the camera head or spring/gooseneck.
Each section has four wheels to help guide the camera through the pipeline.
Each section also features four rocking SeamLeaper™ wings that lead the camera around traps and bends.
Compatible with any push camera up to 1.5” (38mm) in diameter.
Helps negotiate traps and bends in 4” and 6” pipelines.
Trapmaster Adapters available:
No adapter needed for cameras from 1.3" to 1.56"
Buy URS4-AS100 for heads up to 1".
Buy URS4-AS130 for heads from 1" to 1.3"
.
Price $167.00
Free Freight - 48 States
TrapMaster For 4"-6" Pipe
Model
Description
Price
# URS-TM
TrapMaster Roller skid For 4"-6" pipe Cameras to 1.56"
$167.00
Adapters for use with small camera heads
# URS4-AS100
Black plastic adapter for camera heads up to 1"
$17.00
# URS4-AS130
Black plastic adapter for camera heads from 1" to 1.3"
$17.00
The TrapMaster™ was developed to negotiate a 4" trap and keep your camera centered throughout the process. Eight wheels mounted on the skid allow the camera to roll easily in 4” to 6” pipelines. The TrapMaster™ is constructed of the same lightweight, durable, corrosion resistant composite nylon as the larger version. It provides a protective housing that increases camera life. This product does not include a push camera.